LYEN Delivers Low-Noise Propulsion Upgrade for “Dongfanghong 2” Oceanographic Research Vessel, Reducing Underwater Radiated Noise by Over 10 dBIssuing time:2026-07-29 10:55
As one of China’s most advanced comprehensive oceanographic research vessels, the “Dongfanghong 2” carries critical missions in deep-sea scientific exploration and marine research. Following her upgrade and lengthening, the vessel’s increased hull resistance by approximately 20% created new challenges for the existing propulsion system. At an operating speed of 11 knots, the original controllable pitch propeller (CPP) generated underwater radiated noise exceeding the UN3 underwater acoustic limit by 3–5 dB, significantly affecting the vessel’s acoustic detection capability and the quality of scientific data collection. As an international marine propulsion company specializing in CPP propulsion systems, transverse thrusters, azimuth thruster systems, and intelligent energy-saving solutions, LYEN Marine Propulsion was entrusted with this challenging propulsion optimization project, leveraging its strong hydrodynamic design expertise and extensive engineering experience. Advanced Hydrodynamic Optimization for High-Performance and Low-Noise PropulsionThe upgraded vessel adopted a twin-engine, single-shaft propulsion configuration, with a main engine power of 3,200 kW. The project required the vessel to achieve a speed of no less than 15 knots at 85% MCR under design draft conditions, while avoiding face cavitation. Meanwhile, at the cruising speed of 11 knots, underwater radiated noise had to remain below the strict UN3 acoustic limit. To meet these demanding requirements, LYEN established a dedicated hydrodynamic engineering team integrating expertise in propeller theory, numerical simulation, and practical marine applications to conduct a comprehensive propulsion optimization study. The team first carried out a systematic evaluation of the original CPP performance, including open-water characteristics, hydrodynamic response in the non-uniform wake field behind the vessel, cavitation inception margin, fluctuating pressure characteristics, and underwater radiated noise spectrum. Through advanced unsteady CFD simulations and acoustic analysis based on the Ffowcs Williams–Hawkings (FW-H) acoustic analogy, LYEN accurately captured cavitation evolution processes and identified the primary noise sources, including dominant low-frequency tonal components and broadband noise contributors.
Propeller Redesign for Cavitation Control and Noise ReductionThe analysis revealed that the original propeller had been optimized primarily for maximum-speed operation, resulting in early cavitation inception and severe cavitation fluctuations under low-speed, high-load conditions. Additionally, insufficient adaptation to the vessel’s wake field, combined with the lack of blade skew design and the wide blade-tip configuration, contributed to increased tonal noise and broadband noise levels. To overcome these challenges, LYEN’s hydrodynamic experts conducted multi-parameter optimization of the new propeller design, including:
Through iterative unsteady numerical simulations, LYEN compared the acoustic performance of the original and optimized propellers, focusing on cavitation evolution and unsteady excitation forces at 11 knots. The optimized design effectively suppressed low-frequency tonal peaks and reduced broadband noise energy.
Achieving a Major Breakthrough in Low-Noise Propulsion Technology The final onboard underwater radiated noise measurements demonstrated that the newly designed propeller reduced the vessel’s overall noise level by more than 10 dB compared with the original propeller.
Furthermore, across the vessel’s operational speed range, the new propulsion solution remained significantly below the UN3 underwater acoustic limit, fully satisfying the stringent acoustic requirements of the project. This successful upgrade represents another milestone in LYEN’s development of low-pressure, low-noise, and cavitation-resistant high-performance propulsion solutions. The successful transformation of the “Dongfanghong 2” oceanographic research vessel further demonstrates LYEN’s capability in supporting advanced vessels with customized propulsion technologies. With innovation-driven engineering and global expertise, LYEN continues to empower shipowners worldwide and advance toward a deeper international journey in marine propulsion. |